Audio HD not supported?

[nenco]

Hello, my system satisfy this requirements:

AUDIO BITSTREAMING
S/PDIF or HDMI output is required
for audio bitstreaming.

HDMI 1.3 compatible output and
Windows 7 is required for HD audio
bitstreaming.

I can select hd tracks but no hd audio is output, just core sd audio

[marfpilf]

I have this same problem.

[icsterm]

Maybe your hdmi device doesn't recognize AC3/DTS codecs natively. Use stereo in this situation.

[Ghost]

Guys, please check the latest 1.3.0 version as it contains some improvements for HDMI audio bitstream with ATI 5xxxx cards.

[marfpilf]

Catalyst 10.10 drivers (including hotfix 10.10c) using HDMI Audio driver from ATI results in no sound with Splash PRO 1.3.0 when trying to play Dolby TrueHD.

Also, I still cannot play DTS-MA through Splash PRO, only DTS.

[Ghost]

Catalyst 10.10 drivers (including hotfix 10.10c) using HDMI Audio driver from ATI results in no sound with Splash PRO 1.3.0 when trying to play Dolby TrueHD.

Also, I still cannot play DTS-MA through Splash PRO, only DTS.

Does the problem with TrueHD repeat for all files?
Do you repeat a problem with various containers (mkv, m2ts...)?

We have the very same setup here (Win7 + ATI5850) and we can successfully bitstream TrueHD audio with HDMI output.
There can be problems with DTS-MA audio and if we detect problems we try to bitstream core DTS audio then.

[marfpilf]

Thanks for the reply ghost.

I will try to put my TrueHD source in an m2ts container and see if that works and report back.
As far as the DTS-MA issue, is there a reason it always reverts to DTS whenever I play something? Could that be a container issue as well?

[marfpilf]

Leaving the container as M2TS fixed the problem. I can now play TrueHD!

Now about that DTS MA

[ciocia]

Hi, i'm sorry for my english but i don't speak english
Seven is necessary for audio HD, ok, but also hdmi audio output for the normal 5.1 ac3/dts?
I ave installed splash pro trial on my pc: winxp 32 (In the future i install seven64) vga amd 5770 connected to the denon avr2310 with hdmi )

I try a file test audio 5.1 .avi ( test signal for each individual case, useful to see if 5.1 works well ).
In setting/audio, if i select 5.1, audio is ok for all 5.1.
But if i select hdmi bitstream, the sound is bad:
The audio center speaker comes out from two fronts speaker
The sound of the 2 front speakers is ok
The rear speakers and sub are mute

Why? I should not select hdmi audio?

[ciocia]

I answer by myself: I installed seven64 and now HDMI output works correctly

1-Where can I find an audio file to test audio hd? ( dolby true e dts hd )
2- If i buy splash pro, how long does the license? I will be able to update the program forever?